Converting Sampling Rates Of Signals Received At I/O Card Inputs - Yamaha O1V96 Owner's Manual

72
Chapter 6—Analog I/O & Digital I/O
MY8-AE96
MY8-AE96S
MY8-AT
MY16-AT
MY8-TD
MY16-TD
MY8-mLAN
MY16-mLAN
WAVES Y56K
WAVES Y96K
1. This card is a substitution for a 20-bit MY8-AD card.
2. These cards support 24-bit/96 kHz in Double Channel mode. (Separate 96 kHz wordclock required.)
3. This card is identical to the MY8-AE96, except that it features a sampling rate converter.
See the Yamaha Professional Audio Web site at the following URL for up-to-date news on
I/O cards:
<http://www.yamahaproaudio.com/>.
Converting Sampling Rates of Signals Received at I/O
Card Inputs
An optional MY8-AE96S Digital I/O card features sampling rate converters, so you can eas-
ily convert the sampling frequency of digital inputs to the current 01V96 sampling rate.
1 Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly until the
DIO/Setup | Format page appears.
Use the buttons in the SRC sections to turn the sampling rate converters on and off. You can
turn the sampling rate converters of the digital I/O card on or off in pairs (odd & even chan-
nels, in this order).
Tip: The FS box on the Word Clock page displays the sampling frequency at which the 01V96
is currently operating.
Note: The sampling rate converter is available only on the Yamaha MY8-AE96S Digital I/O
card. If you have installed another type of I/O card in the slot, or if no card is installed in the
01V96, the buttons in the SRC sections are disabled.
01V96 Version 2—Owner's Manual
Card Format In
AES/EBU I/O 8
3
2
8
ADAT I/O
2
16
2
8
Tascam
2
16
2
8
IEEE1394
2
16
ADAT 8
Out Resolution/Sampling Rate
8 24-bit, 44.1/48/88.2/96 kHz D-sub 25-pin
8
16
8
24-bit, 44.1/48 kHz
16
8
16
24-bit, 44.1/48 kHz
8
24-bit, 44.1/48/88.2/96 kHz
Connectors
Optical x2
Optical x4
D-sub 25-pin
BNC wordclock output
D-sub 25-pin
6-pin 1394 connector x2
Optical x2