Delay Lcr; Stereo Delay - Yamaha O1V96 Owner's Manual

STEREO DELAY

Two input, two output basic stereo delay.
Range
Parameter
DELAY L 0.0–1350.0 ms Left channel delay time
DELAY R 0.0–1350.0 ms Right channel delay time
Left channel feedback (plus val-
ues for normal-phase feedback,
FB. G L –99 to +99%
minus values for reverse-phase
feedback)
Right channel feedback (plus val-
ues for normal-phase feedback,
FB. G R –99 to +99%
minus values for reverse-phase
feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
THRU,
HPF High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF Low-pass filter cutoff frequency
THRU
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
NOTE L TEMPO to determine left chan-
nel DELAY
Used in conjunction with
NOTE R TEMPO to determine right chan-
1
nel DELAY
1.
(Maximum value depends on the tempo setting)
MOD. DELAY
One input, two output basic repeat delay with mod-
ulation.
Parameter Range
DELAY 0.0–2725.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
WAVE Sine, Tri
THRU,
HPF
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
SYNC OFF, ON
1
DLY.NOTE
2
MOD.NOTE
1.
Maximum value depends on the tempo setting)
2.
Description
Description
Delay time
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feed-
back)
High-frequency feedback ratio
Modulation speed
Modulation depth
Modulation waveform
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Tempo parameter sync on/off
Used in conjunction with
TEMPO to determine DELAY
Used in conjunction with
TEMPO to determine FREQ
(
Effects Parameters

DELAY LCR

One input, two output 3-tap delay (left, center,
right).
Range
Parameter
DELAY L 0.0–2730.0 ms Left channel delay time
DELAY C 0.0–2730.0 ms Center channel delay time
DELAY R 0.0–2730.0 ms Right channel delay time
FB. DLY 0.0–2730.0 ms Feedback delay time
LEVEL L –100 to +100% Left channel delay level
LEVEL C –100 to +100% Center channel delay level
LEVEL R –100 to +100% Right channel delay level
Feedback gain (plus values for
normal-phase feedback, minus
FB. GAIN –99 to +99%
values for reverse-phase feed-
back)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
THRU,
HPF High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF Low-pass filter cutoff frequency
THRU
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
NOTE L
TEMPO to determine DELAY L
Used in conjunction with
NOTE C 1
TEMPO to determine DELAY C
Used in conjunction with
NOTE R
1
TEMPO to determine DELAY R
Used in conjunction with
NOTE FB
1
TEMPO to determine FB. DLY
1.
Maximum value depends on the tempo setting)
01V96 Version 2—Owner's Manual
261
Description
(