Double Channel; Double Speed - Yamaha O1V96 Owner's Manual

76
Chapter 6—Analog I/O & Digital I/O

• DOUBLE CHANNEL

In Double Channel mode, digital audio data is received and transmitted as mono signals at
a sampling rate that is exactly half (44.1/48 kHz) the current higher sampling rate. Data is
handled by two channels. This is useful when you wish to transfer data between the 01V96
running at a higher sampling rate and legacy 44.1/48 kHz digital MTRs or HDRs.
Note: Double Channel mode reduces the total number of inputs or outputs on the correspond-
ing slot. The even-numbered channels are disabled.

• DOUBLE SPEED

In Double Speed mode, digital audio data is received and transmitted at the current high
sampling rate (i.e., 88.2 kHz or 96 kHz). Select this mode if the devices that support the
higher sampling rates transmit or receive data.
Note: You can select this setting only for slots in which a digital I/O card that inputs/outputs
double-speed digital audio data (e.g., MY8-AE96, MY8-AE96S) is installed.
• SINGLE
In Single mode, digital audio data is received and transmitted at a sampling rate that is half
(44.1/48 kHz) the current higher sampling rate of the 01V96. For example, this is useful
when you wish to send 44.1 kHz digital signals from an external HDR to the 01V96 running
at 88.2 kHz.
Note: You cannot select this setting for slots in which a digital I/O card that inputs/outputs
double-speed digital audio data (e.g., MY8-AE96, MY8-AE96S) is installed.
Tip: The parameter fields display "–" if the slot contains no I/O card or if an AD/DA card or
other I/O card that does not allow you to set the transfer format has been installed.
01V96 Version 2—Owner's Manual