Subnetwork - Fritz! Fon WLAN 7390 Installation, Configuration And Operation

Fixed IP Addresses When the DHCP Server Is Enabled
3.6

Subnetwork

Fixed IP Addresses When the DHCP Server Is Enabled
If you would like to configure fixed IP addresses on indi-
vidual computers connected with the FRITZ!Box despite
the enabled DHCP server, please note the following:
•
The IP addresses must be from the IP network of the
FRITZ!Box.
•
The IP addresses may not come from the address
range of the DHCP server.
•
Each IP address can be assigned only once.
Disabling the DHCP Server
You can disable the DHCP server.
To make sure that all computers remain in the same IP net-
work as the FRITZ!Box, you must enter the IP addresses
manually in the computers' network settings. First disable
the option "Obtain an IP address automatically" and then
enter the IP address manually in the appropriate field.
In the case of the preset IP address of the FRITZ!Box, the
following IP addresses are available for assignment to the
computers:
192.168.178.2 - 192.168.178.254
Each IP address can be assigned only once.
By default the option "All computers are located in the
same IP network" is enabled in the FRITZ!Box.
If the factory settings were not changed, this setting has
the following effect:
The DHCP server of the FRITZ!Box assigns all of the com-
puters connected with the FRITZ!Box an IP address from
the address range of the DHCP server.
This means that all of the computers connected with the
FRITZ!Box are located in the same IP network.
156