Ip Settings - Fritz! Fon WLAN 7390 Installation, Configuration And Operation

Always assign the same IP address
3.2

IP Settings

Always assign the same IP address
The detailed view for network devices includes the setting
"Always assign this network device the same IP address".
When this setting is enabled for a network device, the
DHCP server of the FRITZ!Box will always assign the same
IP address to this device each time the connection is es-
tablished.
Start Computer: Wake on LAN
The detailed view for network devices that are connected
with the FRITZ!Box via a network (LAN) port includes the
"Start Computer" button. Use this button to start comput-
ers that support Wake On LAN.
With the Wake on LAN function you can start computers in
your FRITZ!Box via the Internet. For instance, you can ac-
cess a computer at any time using remote maintenance
software, without wasting electricity by keeping the com-
puter switched on permanently.
The IP settings of the FRITZ!Box are preset upon delivery
with the following values:
Factory Settings
All computers are located in the
same IP network
IP address
Subnet mask
DHCP server
The IP address and the corresponding subnet mask yield
the following values:
Network address of the subnet 192.168.178.0
Entire IP address range for the
computers
153
enabled
192.168.178.1
255.255.255.0
enabled
192.168.178.2 -
192.168.178.254