LEDs
LED
Condition
Power/DSL
on
flashing
Internet
on
flashing
Fixed Line on
flashing
WLAN
on
flashing
Info
on
flashing
flashes red
Meaning
FRITZ!Box on standby
•
the device has electrical power and the DSL line is
•
ready for operation
the device has electrical power
•
the connection to DSL is being established or has
•
been interrupted
a telephone connection to the Internet is active
there are messages in your mailbox (this function must be
supported by your telephony carrier)
a telephone connection via the telephone line (ISDN/ana-
log) is active
there are messages in your mailbox (this function must be
supported by your telephony carrier)
WLAN function is enabled.
enabling or disabling WLAN function
•
adopting the WLAN settings
•
performing WPS
•
WPS procedure aborted: More than two WLAN devices
•
are performing WPS at the same time. Repeat the con-
nection routine.
a telephone connection between two Internet telepho-
•
ny subscribers is active; the call is free of charge (this
function must be supported by your Internet telepho-
ny provider)
signals an event specified by the user
•
Stick & Surf procedure concluded
•
updating the firmware
•
specified value for online meter reached
•
signals an event specified by the user
•
Stick & Surf procedure in progress
•
Error: Open the FRITZ!Box user interface and follow the in-
structions on the "Overview" page
124