Fritz! Fon WLAN 7390 Installation, Configuration And Operation page 84

Disabling Automatic Outside Dialing
Transmission of the connected line's number can be
switched on and off for each extension individually. Trans-
mission of the connected line's number is permanently
enabled in the factory settings.
Enabling Connected Line Identification Restriction (COLR)
Permanently
N
r53<Ext.>s1s
r91ss
O
Enabling Connected Line Identification Presentation (COLP)
Permanently
N
r53<Ext.>s0s
r91ss
O
Disabling Automatic Outside Dialing
The FRITZ!Box offers the possibility of disabling automatic
outside dialing. This means that you will receive an inter-
nal dialing tone when you lift the handset at the corre-
sponding extension. This makes sense at any extension
which is used to make many internal calls, for instance,
between the extensions of the FRITZ!Box. When automatic
outside dialing is disabled, for an external call the "0"
must be dialed before the telephone number.
Pick up the handset.
Dial the sequence shown at left.
Save your settings if desired by dial-
ing the sequence shown at left.
Hang up the handset.
Pick up the handset.
Dial the sequence shown at left.
Save your settings if desired by dial-
ing the sequence shown at left.
Hang up the handset.
84