Table of Contents
Advertisement
Establishing a WLAN Connection Manually
WPA Not Supported
SSID (name of the
WLAN radio network)
Encryption methods
Encryption
WLAN key
Network mode
3.
Confirm your entries using the relevant button in the
user interface (for instance, "OK" or "Connect").
Now your WLAN adapter and the FRITZ!Box are connected
with each other wirelessly.
Please see the instructions in the section "Opening the
User Interface" on page 28. See also the information on
WLAN security in the section "Security" from page 136.
If your WLAN adapter does not support WPA encryption,
you must convert the encryption set in the FRITZ!Box to
WEP. For this you must change the WLAN settings in the
FRITZ!Box. To do so, proceed as follows:
1.
Connect the FRITZ!Box and the computer using the
network cable (yellow) (see the section "Connecting
Computers to the LAN Port" from page 16).
2.
Start a web browser on your computer.
3.
Enter
fritz.box
4.
Select the "WLAN / Security" menu.
5.
Then select WEP encryption and enter a network key.
6.
Click the "Apply" button.
A window is displayed with the WLAN security set-
tings.
7.
Make a note of the settings or print out the page by
clicking the printer icon in the toolbar.
8.
Close the user interface and clear the connection be-
tween the FRITZ!Box and the computer. Remove the
network cable (yellow).
FRITZ!Box Fon WLAN 7390
WPA (TKIP) or WPA2 (AES-CCMP)
WPA PSK or WPA2 PSK (AES)
The key is printed on the sticker on
the base of the device.
Infrastructure
in the address field of the browser.
20
Hide quick links:
Advertisement
Table of Contents
