Fritz! Fon WLAN 7390 Installation, Configuration And Operation page 72

Do Not Disturb
Immediately
Period
Disabling
Do Not Disturb
For every analog extension of the FRITZ!Box, the Do Not
Disturb option can be enabled by telephone. When Do Not
Disturb is set, the telephone connected to the extension
will not ring. In configuring this function you can choose
between enabling the function immediately or selecting a
specific time period.
When Do Not Disturb is enabled immediately, no incoming
calls will be signaled at the specified extension. The Do
Not Disturb setting will remain enabled until it is disabled.
Enabling Do Not Disturb Effective Immediately
r81<Ext.>s0s Immediately enables Do Not Disturb for
r91ss
Alternatively, you can enter a Do Not Disturb period during
which the telephone will not ring. At the extension for
which a Do Not Disturb period is to be configured, define
the period during which the telephone should not ring and
save your entries. Then enable Do Not Disturb. Do Not Dis-
turb then automatically will be switched on daily at the
time entered in the "Start" field and switched off again at
the time defined in the "End" field.
Example: Do Not Disturb should be configured from
8:00 p.m. until 7:00 a.m. daily. Enter the value "2000" for
<Start> and "0700" for <End>.
Enabling Do Not Disturb for a Prescribed Period
r80<Ext.>s
<Start>s<End>s
r91ss
r81<Ext.>s6s Enables Do Not Disturb for the defined
r91ss
Both kinds of Do Not Disturb settings can be disabled by
means of a keypad sequence.
the extension entered as <Ext>.
Saves the settings.
Defines the period for Do Not Disturb at
extension <Ext.>.
Saves the settings.
period.
Saves the settings.
72