Table of Contents
Advertisement
WPS with the Push Button Method
FRITZ!Box Specifies
the PIN
WPS with the Push Button Method
The push-button method (WPS PBC) can be used if your
WLAN adapter is also equipped with a WPS button, or if
WPS can be enabled via the control software of the WLAN
adapter.
1.
Press the "WLAN" button on the FRITZ!Box and hold it
down for at least six seconds.
2.
As soon as the "WLAN" LED begins flashing, enable
the WPS function, either by pressing a WLAN button
or in the device's user interface (depending on the
device). Activation must be started within two min-
utes.
The FRITZ!Box and the WLAN device now connect with
each other automatically. The WLAN device adopts the se-
curity settings of the FRITZ!Box.
WPS with the PIN Method
If your WLAN adapter supports WPS, but does not have a
button to start the push method nor any possibility to en-
able it in its control software, use the PIN method to es-
tablish the WLAN connection.
You can choose between two methods:
1.
Start a web browser.
2.
Enter
fritz.box
The FRITZ!Box user interface opens.
149
in the address field.
Push for approx.
6 seconds
Hide quick links:
Advertisement
Table of Contents
