Fritz! Fon WLAN 7390 Installation, Configuration And Operation page 43

Configuring an Internet Connection Automatically over DSL
The Automatic
Configuration
Procedure
Proceed as follows to perform automatic configuration:
Your Internet Service Provider transmitted you informa-
tion about the configuration of your Internet connection.
Always perform the Internet connection setup as de-
scribed by your provider!
1. Connect the FRITZ!Box to the DSL line.
The automatic configuration starts automatically.
2. Wait until the automatic configuration has conclud-
ed. This process can take around five to ten minutes.
During this time the FRITZ!Box receives all necessary
settings directly from the autoconfiguration server of
your Internet Service Provider.
After automatic configuration you can surf the web
and use any other contracted services (like Internet
telephony) right away.
3. To check that the automatic configuration was com-
pleted successfully, open a web browser and enter
any Internet address.
Then you may want to try out the other services or-
dered from your Internet Service Provider, such as In-
ternet telephony.
Further settings can be configured in the user interface of
your FRITZ!Box. The "Wizards" area offers easy-to-use,
step-by-step instructions on all important functions. Use
these to set up the FRITZ!Box in accordance with your own
needs.
43