Fritz! Fon WLAN 7390 Installation, Configuration And Operation page 35

Setting Up an IP Telephone in the FRITZ!Box
– USB memory on which the incoming faxes are
stored. For this option a USB memory device must
be connected to the USB port of the FRITZ!Box.
– Automatic fax detection for an analog fixed line,
which detects whether an incoming call is a fax.
•
Answering machine
– specifications about how calls should be accept-
ed, and whether the message should also be sent
by e-mail
– internal name for the answering machine
– Call acceptance: Enter here whether the answer-
ing machine should react to all calls or only to
calls for certain numbers.
– Remote inquiry, which can be used to pick up
messages from the answering machine from an-
other telephone line.
Setting Up an IP Telephone in the FRITZ!Box
Before you can use an IP telephone with the FRITZ!Box, it
must be set up. Follow the instructions below:
See also the manufacturer's documentation for informa-
tion about how to set up your IP telephone.
1. Open the FRITZ!Box user interface (see the section
"Opening the User Interface" on page 28).
2. Enable the "Expert Mode" settings in the "System"
menu.
3. Click "Wizards /Managing Your Telephony Devices"
and then click "Next".
4. Select the option "Telephone" and then click "Next".
5. Select "LAN/WLAN (IP telephone)", assign a name
and then click "Next".
6. Assign a password.
35