Audio Signals; Configuring On The Telephone - Fritz! Fon WLAN 7390 Installation, Configuration And Operation

Audio Signals

9.2 Audio Signals
9.3

Configuring on the Telephone

The following diagram illustrates the duration and inter-
vals of the various audio signals and ring tones of the tele-
phones connected to the FRITZ!Box Fon WLAN 7390.
Audio signals and ring tones of the connected telephones
Saving New Settings
In this section, saving refers to all current settings made in
the FRITZ!Box. It is not necessary to save the configuration
immediately after every change. You may first configure all
of your settings as desired, and then save them perma-
nently.
Permanent saving cannot be reversed. However, you can
change the settings by using new commands or restore
the FRITZ!Box to its factory settings.
70