Fritz! Fon WLAN 7390 Installation, Configuration And Operation page 92

Alternating Between Calls
Alternating Between Calls
Whenever you have one active connection and one caller
on hold, you can switch from one call to the other as often
as you want using the Hold button.
Alternating Between Calls
Call 1 You are talking to caller 1.
P
R
Press the Hold button. Caller 1 is now on hold.
M To establish a second call, simply dial ss plus
the desired extension number for an internal
call, or the desired external number.
Call 2 If the call is answered, you can consult on this
line. The original caller is still on hold.
P
R2
To switch back from caller 2 to caller 1, dial the
sequence shown at left.
Call 1 Caller 1 is now active again and caller 2 is on
hold.
P
R2
To switch back again from caller 2 to caller 1, dial
the same sequence. In this way you can alternate
between the two connections.
Ending Hold
O
The caller on hold hangs up. You can continue
talking on the active connection.
R1
You end the active connection by dialing the se-
quence shown at left. The call that was on hold is
now active again, and there is no call left at hold.
O
You can also return to the call on hold by hanging
up the handset: this ends the currently active
K
connection. In this case the telephone rings as
Call
soon as you hang up. Pick up the handset again
to return to the last call that was on hold.
P
92