Fritz! Fon WLAN 7390 Installation, Configuration And Operation page 93

Three-Party Conference Call
Three-Party Conference Call
FRITZ!Box allows you to hold telephone conferences with
two other people at once. Two external and one internal
party, or two internal and one external party can conduct a
conference call with each other.
Conducting a Three-Party Conference Call
N
Pick up the handset.
M
Dial the external number of the first party. Talk.
R
Press the Hold button.
M To establish a second call, simply dial ss plus
the desired extension number for an internal
call, or the desired external number.
You can now conduct a second conversation
while your first call is on hold.
R3
Dial the sequence shown at left to begin a three-
party conference call.
D
Now all three participants can confer together. If
either of the other two parties hangs up, your
connection with the remaining participant re-
mains active.
O
You can end the three-party call by hanging up
the handset.
R2
You can also switch from the three-party call
back to the original two-party connection. Dial
the sequence shown at left. This ends the three-
party conference. The connection that was active
last before you initiated the three-party confer-
ence is now active again. The other call is on
hold. You can alternate between the two connec-
tions by dialing the same sequence again.
93