Fritz! Fon WLAN 7390 Installation, Configuration And Operation page 83

Displaying the Incoming Caller ID (CLIP)
Displaying the Incoming Caller ID (CLIP)
The CLIP (Calling Line Identification Presentation) function
makes the number of callers—external and internal—visi-
ble on your telephone display.
This feature is only effective if your telephone supports
CLIP.
The CLIP function is enabled in the factory settings. This
function can be permanently disabled and enabled again.
Enabling Display of Incoming Caller ID (CLIP)
N
r50<Ext.>s1s
r91ss
O
Disabling Display of Incoming Caller ID (CLIP)
N
r50<Ext.>s0s
r91ss
O
Connected ISDN Line Identification Restriction and
Presentation (COLR/COLP)
By default, a caller's display always shows the Multiple
Subscriber Number (MSN) of the extension she or he
dialed. Yet if you take the call at another extension, the
MSN of this extension will be displayed. If you want this
number to remain concealed so that the caller does not
know that the call has been picked up at another exten-
sion, you have the option of suppressing transmission of
the connected line's number. The caller's display will con-
tinue to show the number dialed.
Pick up the handset.
Dial the sequence shown at left.
Save your settings if desired by dial-
ing the sequence shown at left.
Hang up the handset.
Pick up the handset.
Dial the sequence shown at left.
Save your settings if desired by dial-
ing the sequence shown at left.
Hang up the handset.
83