Fritz! Fon WLAN 7390 Installation, Configuration And Operation page 96

Explicit Call Transfer (ECT)
Explicit Call Transfer from a Three-Party Conference Call
N
Pick up the handset.
M
Dial the external number of the first party. Talk.
R
Press the Hold button.
M
Dial the number for your second external call.
You can now conduct a second conversation
while your first call is on hold.
R3
Dial the sequence shown at left to begin a three-
party conference call.
D
Now all three participants can confer together. If
either of the other two parties hangs up, your
connection with the remaining participant re-
mains active.
To clear your connections while allowing the ex-
ternal parties to continue the call, connect the
parties with each other.
R2
You can also switch from the three-party call
back to the original two-party connection. Dial
the sequence shown at left. This ends the three-
party conference. The connection that was active
last before you initiated the three-party confer-
ence is now active again. The second external
call is on hold. You can alternate between the
two connections by dialing the same sequence
again.
R4
Dial the sequence shown at left. The connection
on hold and the active connection are connected
with each other. The external parties continue
the call while you clear the connection.
O
Hang up the handset.
96