Fritz! Fon WLAN 7390 Installation, Configuration And Operation page 134

Setting the Right Standard in the FRITZ!Box
Note the following for the configuration of this setting:
•
Your FRITZ!Box Fon WLAN 7390 can make two WLAN
networks available simultaneously for data transmis-
sion. One of the WLAN radio networks works in the
2.4-GHz frequency band, and the other in the 5-GHz
frequency band. This means the FRITZ!Box can be im-
plemented as an especially flexible access point for
the various WLAN adapters and applications in your
network.
•
Set the standards of the two WLAN radio networks in
the FRITZ!Box such that they are compatible with all
of the WLAN adapters used in the wireless network.
Make a note of which standards the WLAN adapters in
your network are compatible with and then adjust the
FRITZ!Box settings according to the following information:
•
Your radio network integrates only WLAN adapters
that are compatible with one or both of the following
standards:
– 802.11n
– 802.11g
In this case set the WLAN standard for the 2.4-GHz
frequency band to:
"802.11n+g".
If the 5-GHz frequency band is not used, in order to
reduce energy consumption you can disable it in the
FRITZ!Box without losing WLAN connections.
•
Your radio network integrates only WLAN adapters
that are compatible with one or both of the following
standards:
– 802.11b
134