Configuring The Ck30 With The Setup Assistant - Intermec CK30 User Manual

Configuring the CK30 With the Setup Assistant

CK30 Handheld Computer User's Manual
When first setting up the CK30, use the Setup Assistant to set or
enable basic network parameters and connect your CK30 to the
network. The Setup Assistant guides you through setting the
following basic network parameters:
• Date and time
• 802.11 radio
• WEP security
• DHCP server or IP address, subnet mask, and default router
• Device name
Note: If you are using the CK30 in an EasyADC system, enable
the ION client. Your CK30 configures the security parameters,
reboots, and launches the TE 2000 application. When the CK30
connects to its host, the Intermec Ready-to-Work Indicator
turns on solid blue.
To set other parameters, use the Configuration Utility or
another configuration method. The Setup Assistant runs on the
CK30 the first time you turn on the computer.
The Setup Assistant Start Screen
After you complete the Setup Assistant, the CK30 should be
communicating with your network.
Chapter 2 — Configuring the CK30
33