Chapter 2 — Configuring the CK30
48
The easiest way to configure the network parameters on the
CK30 is to use the Configuration Utility. For help, see
"Configuring the CK30 With the Configuration Utility" on
page 34.
Configuring the Network Parameters for a UDP Plus Network
In a UDP Plus network, the CK30 communicates with a host
computer through the Intermec Application Server.
Host
Ethernet
Intermec Application Server
CK30s in a UDP Plus Network
UDP Plus
Access point
CK30s
CK30 Handheld Computer User's Manual