Configuring Ethernet Communications - Intermec CK30 User Manual

Configuring Ethernet Communications

CK30 Handheld Computer User's Manual
The Intermec Application Server translate UDP Plus packets on
the wireless network into TCP/IP packets on the wired network
and vice versa. The access point acts as a bridge to allow
communications between the wired network and the wireless
network.
To use wireless communications in a UDP Plus network
1 Configure these network parameters on each CK30 in the
network:
• Network Name (SSID)
• Controller IP Address
• IP Settings (if not using DHCP)
• Network Port
2 Configure the security. For help, see "Configuring Security"
on page 53.
You can configure the network parameters on the CK30 with
the Configuration Utility. For help, see "Configuring the CK30
With the Configuration Utility" on page 34.
You can use the CK30 directly in an Ethernet network if you
have ordered the Ethernet option on your CK30A and you
insert it into an AD1 or AD2 Communications Dock. The
communications dock has an Ethernet connector that makes it
possible for the CK30 to communicate with your Ethernet
network.
Chapter 2 — Configuring the CK30
49