Cleaning The Scanner Window And Ck30 Screen - Intermec CK30 User Manual

Chapter 6 — Troubleshooting and Maintaining the CK30

Cleaning the Scanner Window and CK30 Screen

130
Note: Date and time settings are not saved through a cold boot.
You will need to reset the time and date.
To keep the computer in good working order, you may need to
perform these minor maintenance tasks:
• Clean the scanner window.
• Clean the CK30 screen.
Clean the scanner window and CK30 screen as often as needed
for the environment in which you are using the computer. To
clean the CK30, use a solution of ammonia and water.
There are no user-serviceable parts inside the CK30.
Opening the unit will void the warranty and may cause
damage to the internal components.
Attention: Le CK30 ne contient pas de pièces réparables par
l'utilisateur. Le fait d'ouvrir l'unité annule la garantie et peut
endommager les pièces internes.
To clean the scanner window and computer screen
Press I to turn off the CK30.
1
Dip a clean towel or rag in the ammonia solution and wring
2
out the excess. Wipe off the scanner window and screen. Do
not allow any abrasive material to touch these surfaces.
Wipe dry.
3
CK30 Handheld Computer User's Manual