Configuring Ck60 Parameters; Configuring With The Setup Assistant - Intermec CK60 User Manual

Script Command Description
EXEC Launches a specified program and waits up to 10 minutes for it to complete.
CALL Processes a specified file of commands, returns. When you use the CALL command, the execution
of the current file pauses while a new file that follows the same set of commands executes. Once
the new file completes executing, AutoRun.exe continues processing the current file.
CHAIN Processes a specified file of commands and does not return. This command calls another file that
follows the same set of commands and stops processing the current file.
RUN Loads a specified program and executes it. Specifies the show window attribute so that the user
interface is visible when the application launches.
LOAD Loads a specified program and executes it. Specifies the hide window attribute so the user interface
is hidden initially.

Configuring CK60 Parameters

Configuring with the Setup Assistant

CK60 Mobile Computer with Windows CE User's Manual
3 Write commands for AutoRun.dat with these script commands:
4 Save this Notepad file as AutoRun.dat.
5 Copy the AutoRun.dat file to the "\SYSTEM" folder on your CK60.
During every boot, the system scans for AutoRun.dat in the "\SYSTEM"
folder.
Here is a sample AutoRun.dat file that runs a dialer application and
connects to a VPN:
EXEC "\Program Files\My Dialer\Dialer.exe" 348-2600
EXEC "\Program Files\My VPN\Connect.exe" MyDomain
You can configure many parameters on the CK60, such as bar code
symbologies or the network settings using the Intermec Settings applet.
You can control some characteristics with configuration parameters. The
values you set for these parameters determine how the CK60 operates.
When first setting up the CK60, use the Setup Assistant to set or enable
basic network parameters and connect your CK60 to the network. The
Setup Assistant helps set the date and time (including time zone), SSID
(Network name), DHCP server or IP address, subnet mask, and default
router, primary and secondary DNS or WINS addresses, and device name.
To set other parameters, use another configuration method, such as with
the Intermec Settings applet described in the next section. You can initiate
the Setup Assistant manually. After the Setup Assistant is done, the CK60
should communicate with the network and add an icon in the taskbar.
Chapter 3 — Configuring the Computer
47