Chapter 2 — Configuring the CK30
How to Configure the CK30 Parameters
Use Setup Assistant on the CK30
Use Setup
Assistant to
quickly enter
network
parameters.
Use the SmartSystems Console
Use Intermec Settings
from within the
SmartSystems Console
to remotely configure
network parameters.
32
You can configure many parameters on the CK30, such as the
bar code symbologies it decodes or the network settings. These
characteristics are controlled by configuration parameters. The
values you set for these configuration parameters determine how
the computer operates.
There are several ways to configure the CK30:
Use Configuration Utility on the CK30
Use the
Configuration
Utility to set all
parameters.
Use Configuration Commands
Send commands
through the
network to
your CK30s.
Scan Bar Codes
Scan bar codes
to configure basic
CK30 and data
collection
parameters.
CK30 Handheld Computer User's Manual
Ethernet
or Wireless
Network