Scanning With The Integrated Laser Scanner Or 1D Linear Imager - Intermec CK30 User Manual

Scanning With the Integrated Laser Scanner or 1D Linear Imager

Scan button
Scanning: Using the integrated laser scanner or 1D linear imager to scan a bar
code label.
CK30 Handheld Computer User's Manual
Chapter 1 — Using the CK30 Handheld Computer
If the CK30 has a laser scanner or 1D linear imager, use the
following procedure to practice how to scan a bar code. The
linear imager can decode PDF417 bar codes as well as bar codes
with high-density, wide-density, and poor quality in any lighting
conditions.
To scan a bar code label with the laser scanner or 1D linear imager
1 Press I to turn on the CK30.
2 Point the scanner window at the bar code label and hold the
computer at a slight angle six to ten inches from the label.
Note: If you have an advanced long-range scanner, you may
need to hold the computer further away from the label.
3 Press the Scan button on the keypad or pull the trigger on a
handle and direct the red beam so that it falls across all bars in
the bar code label.
Good Read light (green)
*
C
E
M
R
E
T
N
I
*
23