Intermec CK30 User Manual page 153

Appendix A — Specifications
AL1 Holster and Belt
The holster and belt provide an easy way for you to carry the
CK30 while not using it. The holster and belt support either
right or left-handed use and you can use it to carry a CK30 with
or without a handle. You can only use this accessory with a
CK30 that has either the 1D linear imager or the 2D imager.
AL2 Handstrap
The removable and adjustable handstrap make it easy for you to
hold and use the CK30 without tiring your hand.
AL3 Swiveling Belt Clip
Use the swiveling belt clip to store your CK30 while not in use.
Once you have attached the belt clip, it is easy to insert and
remove the CK30 as necessary.
AV1 Vehicle Cradle
Use the AV1 vehicle to attach your CK30 to a vehicle, such as a
forklift. The vehicle cradle provides protection from vibrations
that exceed the level the CK30 can withstand alone.
Decoded Serial Adapter (P/N 075510)
The decoded serial adapter converts the 26-pin serial port on the
CK31 into a DB9 (9-pin) male serial connector that you can
connect to a decoded scanner.
Undecoded Serial Adapter (P/N 075509)
The undecoded serial adapter converts the 26-pin serial port on
the CK31 into a DB9 (9-pin) male serial connector that you can
connect to an undecoded scanner.
CK30 Handheld Computer User's Manual 137