Configuring The Cn2A With The Setup Assistant - Intermec CN2A User Manual

Configuring the CN2A With the Setup Assistant

CN2A Mobile Computer User's Manual
The Setup Assistant runs on the CN2A the first time you turn on
the computer. Use the Setup Assistant to set or enable basic
network parameters and connect your CN2A to the network.
The Setup Assistant guides you through setting the following
basic network parameters:
• Date and time
• 802.11b/g radio and SSID (Network name)
• 802.1x security
• DHCP server or IP address, subnet mask, and default router
• Primary and secondary DNS addresses
• Primary and secondary WINS addresses
• Device name
To set other parameters, use Intermec Settings or another
configuration method.
The Setup Assistant Start Screen
After you complete the Setup Assistant, the CN2A should be
communicating with your network. A Network Connection
, , , or
( )
information on the network icons, see "Understanding the
Screen Icons" on page 15.
Chapter 2 — Configuring the CN2A
appears on your taskbar. For more
icon
33