Keypad Test; Led Test - Intermec CK30 User Manual

Keypad Test

LED Test

CK30 Handheld Computer User's Manual
Sample Screen
A developer can use the Keypad Test to quickly find the hex
value for any key on the keypad. You can also test to make sure
the keypad is operating correctly.
To open the Keypad Test diagnostic
• Go to Diagnostics > Hardware Diagnostics > Keypad Test.
Sample Screen
Use the LED Test to make sure that your LEDs (lights) are
operating correctly. The LED Test turns all of the lights on the
CK30 on in this sequence: Good Read light, the user-defined
lights, and then the Intermec Ready-to-Work Indicator light.
The lights blink one time each and then they blink five times
each.
Chapter 5 — Running Diagnostics
111