Intermec CK30 User Manual page 76

Chapter 2 — Configuring the CK30
60
d Enter the User Name, Password, and select the Save
password check box.
e (Optional) In the Domain field, enter the Active Directory
domain associated with the user account.
f Press Enter. You return to the Communications menu.
7 Exit the Configuration Utility.
To enable WPA-PSK With Microsoft Security
1 Make sure you have configured the communications and
radio parameters on your CK30.
2 Press C and then B to open the System Main Menu.
3 Choose Configuration Utility > Communications > 802.11
Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA-PSK. Data
Encryption automatically defaults to TKIP.
6 For Pre-Shared Key, enter a pre-shared key or the
passphrase.
The pre-shared key must be a value of 32 hex pairs preceded
by 0x for a total of 66 characters. The value must match the
key value on the authenticator. The passphrase must be from
8 to 63 characters. After you enter a passphrase, the CK30
internally converts it to a pre-shared key.
This value must match the passphrase on the authenticator.
7 Exit the Configuration Utility.
CK30 Handheld Computer User's Manual