Table 5.1 Meanings Of The Mode Switch - Fujitsu PRIMEPOWER 1000 User Manual

CHAPTER 5 Main Unit Operator Panel Operation
Table 5.1
Function
State definition
Sending Break recognition
Pon/Poff
(*)
*) auto boot: Solaris automatically starts up when main power is turned on.
boot stop: Stops in OBP mode when main power is turned on. Solaris is not activated.
If the OS is activated when Poff (described above) is operated, it starts the shutdown sequence.
38
lists the meanings of the Mode switch on the operator panel.

Table 5.1 Meanings of the Mode Switch

Normal operating
state
Disabled
Pon/Poff by the Only power-on is
power switch enabled
(auto boot)
Pon/Poff by the Enabled
SMC (auto boot)
Pon/Poff by the Enabled
facility (RCI) (auto boot)
Partition start-up Enabled
command (up) by (auto boot)
the panel
Pon/Poff by the Enabled
Automatic Power (auto boot)
control
Mode switch
LOCK UNLOCK
Maintenance state
(Software)
Enabled
Enabled
(boot stop)
Enabled
(boot stop)
Enabled
(boot stop)
Enabled
(boot stop)
Enabled
(boot stop)
MAINTENANCE
Maintenance state
(Hardware)
Enabled
Enabled
(boot stop)
Enabled
(boot stop)
Disabled
Enabled
(boot stop)
Only power-off is
enabled
C120-E093-04EN