Power-On/Off The Partition; Power-On The Partition - Fujitsu PRIMEPOWER 1000 User Manual

b) Power-off using the SMC
1
Shut down the power supply to the main unit by executing the "System Power-
Off Instruction" in the "Machine Administration Menu" of System Console
Software.
For details on the power off by the SMC, see Section 6.2, "System power operation," in the
"System Console Software User's Guide."
2
After powering off the main unit, turn off the peripheral power switches.
(2) Automatic power-off
Power supply to the main unit can be shut down automatically by using the Automatic Power
Supply Control of the SMC. For details, see Section 6.5, "Auto Power Control System
(APCS)," in the "System Console Software User's Guide."
3.3

Power-on/off the Partition

This section describes how to turn on/off the partition.
3.3.1

Power-on the Partition

This section describes how to turn on the partition. There are two ways, a) and b), to turn on the
partition.
a) Power-on the partition using the operator panel
1
Confirm that the circuit breaker is on.
2
Turn on the partition using the operator panel.
For details on the panel operation, see the
Startup)."
b) Power-on the partition using the SMC
1
Confirm that the circuit breaker is on.
2
Select the partition by System Console Software and execute the partition
startup instruction.
For details on the power-on by the SMC, see Section 7.1, "Startup and Shutdown of Partitions,"
in the "System Console Software User's Guide."
C120-E093-04EN
Section 5.2.3, "Panel Operation (Example of Partition
3.3 Power-on/off the Partition
21