System Control Facility; Figure 4.7 System Control Facility Board - Fujitsu PRIMEPOWER 1000 User Manual
Hide thumbs
Also See for PRIMEPOWER 1000:
- User manual (905 pages) ,
- Tool reference (578 pages) ,
- Installation manual (344 pages)
Table of Contents
Advertisement
CHAPTER 4 Hardware Overview
4.5
System Control Facility
The System Control Facility board monitors or controls the PRIMEPOWER2000.
l One System Control Facility board is installed in both the Base cabinet and System
Expansion cabinet, respectively.
l System Control Facility board provides a LAN port for connection to the SMC. This is a
private LAN.
l The LAN can only be used to connect to the SMC and the Console Connection Unit.
l PRIMEPOWER1000/800 systems allow the installation of the redundant hot swappable
components (System Console Facility board option). Two System Control Facility boards
on each Base cabinet and System Expansion cabinet (PRIMEPOWER1000) can be installed
so that the system does not need to be powered off for replacement.
30
Figure 4.7 System Control Facility Board
C120-E093-04EN
Advertisement
Table of Contents
