Enabling Access Gateway Mode Using The Cli; Changing From Access Gateway Mode To Fabric Switch Mode - Fujitsu PRIMERGY BX900 Quick Start Manual

Enabling Access Gateway mode using the CLI

Complete the following steps to enable Access Gateway mode using the CLI.
1. Log in using the default administrative account.
Login: admin
Password: password
2. Enter the switchDisable command to disable Embedded Switch Module.
3. Enter the configUpload command to save the current configuration on the Embedded Switch Module.
This command is optional and is only required if you are converting an existing Embedded Switch Module to
Access Gateway mode.
4. Enter the following command to enable Access Gateway mode:
ag ––modeEnable
The Embedded Switch Module automatically reboots and comes back online in Access Gateway mode using a
factory default F_Port to N_Port mapping. You can enter the
ag ––modeShow command to ensure that the module is in Access Gateway mode. See the Access Gateway
Administrator's Guide for more detailed configuration information.
You can also enter the ag ––mapshow command to display the F_Port to N_Port mapping. Enter ag ––help
command to display a list of all Access Gateway actions.

Changing from Access Gateway mode to Fabric Switch mode

If your Embedded Switch Module is currently configured in Access Gateway mode, you can enable the module for
Fabric OS Native mode by disabling Access Gateway mode. When you do this, the module automatically reboots in
Fabric OS Native mode; however, the switch will be segmented so as not to effect the external Fabric. For
instructions on how to join this module to the Fabric, refer to the Access Gateway Administrator's Guide.
Determine if the Embedded Switch Module is running in Access Gateway mode by entering the switchShow CLI
command to display the current switch configuration. If running in Fabric OS Native mode, the switchMode
parameter displays Access Gateway Mode.
For complete instructions on disabling Access Gateway mode using the CLI and joining the switch to the fabric, refer
to the "Disabling Access Gateway Mode" section in the Access Gateway Administrator's Guide.
Brocade 5450 Embedded Switch Module QuickStart Guide
Publication Number: 53-1001265-02
19 of 20