Panel Appearance; Figure 5.1 Panel Appearance - Fujitsu PRIMEPOWER 1000 User Manual
Hide thumbs
Also See for PRIMEPOWER 1000:
- User manual (905 pages) ,
- Tool reference (578 pages) ,
- Installation manual (344 pages)
Table of Contents
Advertisement
CHAPTER 5 Main Unit Operator Panel Operation
5.1.1
Panel Appearance
(1) State indication LCD
Displays registered messages and symbols used in the operation.
(2) POWER LED (Green)
Lights in green when the main power of the main unit is on.
(3) CHECK LED (Yellow)
Lights in yellow if a malfunction has occurred in the main unit.
(4) Mode switch
Shifts the operation mode among LOCK, UNLOCK, and MAINTENANCE. This operation
enables/disables each key operation.
(5) Cursor switch
Switches contents of display.
(6) Decision switch
Defines selected content.
(7) The power switch
Switches the power of the main unit on or off. When powering off, initiate the shutdown process
by pressing the power switch once, then pressing the switch again within 10 to 30 seconds.
The "scftool" command changes the number of times it is necessary to press the power switch.
36
Figure 5.1 Panel Appearance
C120-E093-04EN
Advertisement
Table of Contents
