CHAPTER 2 Specifications and Installation Overview of the Main Unit
2.3
Connecting the SMC
Each partition defined in the main unit is required to establish LAN connection with the SMC.
Use an on-board LAN ports on the System Board of each partition for the connection. In
addition, a LAN connection must be made between the System Control Facility and the SMC.
This LAN connection is used only for local communication between the SMC and the System
Control Facility or between the SMC and the Console Connection Unit.
The distance between the main unit and the SMC should be less than 30 m (98 ft).
For details on the connection, see the Section 3.2.3, "LAN connection of the SMC," in the
"PRIMEPOWER2000/1000/800 Installation Guide."
14
C120-E093-04EN