Fujitsu PRIMEPOWER 1000 User Manual page 13

Notations
This manual uses the following fonts and symbols to express specific types of information.
Fonts/symbols
AaBbCc123
" "
Prompt Notations
The prompt notations in this manual are as follows:
"RC2000" indicates the commands which are entered to a partition by using the remote console
on the SMC. "SMC" indicates the commands which are entered by SMC terminal emulator.
In the actual operation, displayed prompts may be different from below.
(1) C shell prompt notations
Prompt
RC2000% C shell prompt in RC2000
SMC% C shell prompt in SMC
(2) Bourne shell and Korn shell prompt notations
Prompt
RC2000$ Bourne shell and Korn shell prompt in RC2000 RC2000$ command y|n {filename}
SMC$ Bourne shell and Korn shell prompt in SMC
(3) Super user prompt notations
Prompt
RC2000# Super user prompt in RC2000
SMC# Super user prompt in SMC
(4) OBP mode prompt notations
Prompt
{?}ok ok prompt in partition
ok ok prompt in SMC
C120-E093-04EN
Meaning
Commands that users enter.
Names of manual title, chapter,
section, item, button, or menus to
refer to.
Meaning
Meaning
Meaning
Meaning
Example
# ls -l <Return>
See Chapter 3, "Configuration of the
System Console," in the "System
Console Software User's Guide."
Example
RC2000% command y|n {filename}
SMC% command y|n {filename}
Example
SMC$ command y|n {filename}
Example
RC2000# command y|n {filename}
SMC# command y|n {filename}
Example
{?}ok command
ok command
Preface
iii