Signal Cables; Signal Line Configuration; Definitions Of Signals; Figure D.1 Connection With Ups - Fujitsu PRIMEPOWER 1000 User Manual

Appendix D UPC Connector Specifications
D.3

Signal Cables

Use sealed and paired cables. The cables have the following specifications:
l DC resistance (roundtrip / 1 pair): 400 /km or less
l Cable length: Up to 10 m (33 ft)
D.4

Signal Line Configuration

This section describes the definitions of signals and electrical specifications.
D.4.1

Definitions of Signals

Figure D.1
Table D.2
98
shows the signal line configuration in UPS connection.
lists the definitions of signal lines.

Figure D.1 Connection with UPS

C120-E093-04EN