Messages Displayed On The Panel; Circuit Breaker Power-On Messages; Figure 5.4 Message Displayed Area; Table 5.5 Circuit Breaker Power-On Messages - Fujitsu PRIMEPOWER 1000 User Manual

5.3

Messages Displayed on the Panel

This section describes the messages displayed on the operator panel. If you see messages not
described in this section, contact a certified service engineer.
5.3.1

Circuit Breaker Power-on Messages

Figure 5.4
operator panel when the circuit breaker (main power source of the main unit) is turned on.
X - Y Y
T H Z P C
Figure 5.4 Message Displayed Area (When the Circuit Breaker is Turned On)
Display data
initializing...
now inactive
C120-E093-04EN
shows the operator panel status and
: initializing . . .
S 0 1 2 3 4 5 6 7 8 9 a b c d e

Table 5.5 Circuit Breaker Power-on Messages

The System Control Facility is
initializing.
The initialization is completed.
Now checking the configuration.
5.3 Messages Displayed on the Panel
Table 5.5 lists the messages displayed on the
Contents
A few seconds later, the display
changes to the System Control
Facility message (see
Message displayed area
Message details
---
Table 5.6).
45