Conventions For Alert Messages - Fujitsu PRIMEPOWER 1000 User Manual

Preface
Environmental Requirements for Using This Product
This product is a computer which is intended to be used in a computer room. For details on the
operational environment, see the "Installation Planning Manual" of the respective models.

Conventions for Alert Messages

This manual uses the following conventions to show the alert messages. An alert message
consists of an alert signal and alert statements. The alert signal consists of an alert symbol and a
signal word or just a signal word.
Alert messages in the text
In the text, the message is indented to distinguish from the procedural text. A wider line space
proceeds and follows the message to show where the message begins and ends.
(Example)
Electric shock, fire
Do not damage, break, or modify the power cables. Cable damage may cause electric shock
or fire.
The important alert messages are listed in the
OPERATION."
2
For the readers
• If you find any errors in this manual, please fill in the "Reader's Comment Form" sheet at
the back of this manual and forward it to the address described on the sheet.
• This manual is subject to be revised without prior notice.
iv
This indicates a hazardous situation could result in serious personal
injury if the user does not perform the procedure correctly.
This indicates a hazardous situation could result in minor or moderate
personal injury if the user does not perform the procedure correctly.
This signal also indicates that damage to the product or other property
may occur if the user does not perform the procedure correctly.
This indicates information that could help the user to use the product
more effectively.
This indicates the tasks which are performed by the certified service
engineer.
"Important Alert Messages" in the "FOR SAFE
C120-E093-04EN