Precautions For Installation - Fujitsu PRIMEPOWER 1000 User Manual

CHAPTER 2 Specifications and Installation Overview of the Main Unit
2.2

Precautions for Installation

This section shows the precautions for equipment installation.
For details on the Base cabinet installation, see the "Installation Planning Manual" of the
respective models.
Electric shock, fire
Do not damage, break, or modify the power cables. Cable damage may cause electric shock
or fire.
Equipment damage
Be sure to follow the precautions below when installing the equipment. Otherwise the
equipment may be damaged.
l Do not block the ventilation slits.
l Do not install the main unit where it will be exposed to sunlight or heat sources.
l Do not install the main unit in dusty places or places where it will be exposed to corrosive
gases or sea breeze.
l Keep the main unit isolated from vibration. Install the main unit on a level surface.
l Use a grounding cable of category three or greater in Japan. Make sure that the AC power
supply source of the main unit is grounded with dedicated grounding cable. Otherwise the
main unit may malfunction.
l Do not run a cable under a unit or allow a cable to become taut. Do not disconnect the power
cable when the power is turned on.
l Do not place anything on top of the main unit. Do not use the main unit as a work space.
l Avoid condensation in the main unit, do not raise the ambient temperature rapidly in winter.
Use the main unit only after it has warmed up sufficiently.
l Do not install the main unit near a noise generating device such as a photocopier, air
conditioner, or welder.
l Take static electricity prevention measures. Note that some carpets generate static electricity
easily and can cause the main unit to malfunction.
l When moving the main unit, do not pull on the front cover. Otherwise the main unit may be
damaged.
10 C120-E093-04EN