Rotary Switches - Wohler AMP1-E8DA User Manual

Table 2–5
8
9
Note:

Rotary Switches

•
Table 2–6
Position
0 thru 7
8 thru 9
•
Table 2–7
Position
2 thru 8
•
RC4-4 Connector Interface Pin Out
Pin
Channel Select 1, Control Input
Type Select 1, Control Input
For more complete information about the functionality of
the Remote
support representative and ask for the documents with part
numbers 824016 and 824017.
OPT 1 (10-Position Rotary Switch): This recessed 10-position rotary
switch allows for standard operation and software upgrades. Refer
to Table 2–6 for the position values.
OPT 1 Option Settings and Descriptions
Operational Mode (Default=1)
Software Upgrade
OPT2 (10-Position Rotary Switch): This recessed 10-position rotary
switch that is reserved for future use and should be left at the
factory position of 1.
SDI Option Settings and Descriptions
0 Not Used - Reserved for Future Use
1 Operational Mode
Not Used - Reserved for Future Use
9 Software Upgrade
REF (10-Position Rotary Switch): This recessed 10-position rotary
switch allows you to set the analog and digital reference levels for
the unit's level meters, as well as to select the software upgrade
function. In Table 2–8
column) is the analog input level needed to activate the bar graph
segment at the associated digital reference level (digital, right
© 2 0 1 1 Woh l er Te c h n o l o g i es , I n c . A ll r i g h t s r e se r ve d .
C h a p t e r 2
R e a r P a n e l C o n n e c t o r s
Description
connector, contact your Wohler technical
Setting Description
Setting Description
below, the analog reference level (analog, left
8 2 1 0 1 6 :
System Overview
A M P x- E 8 S e r i e s U s e r G u i d e
21