Dolby Metadata - Wohler AMP1-E8DA User Manual

C h a p t e r 5 D o l b y
D o lb y M e t a d a ta

Dolby Metadata

8 2 1 0 1 6 : A M P x- E 8 S e r i e s U s er G u i d e
52
© 2 0 1 1 Wo h l e r Tec h n o l o g i e s , I n c. A l l r i g h t s r e s er ve d .
into the left speaker and Channel 2 is sent into the right speaker. See
Table 7–5 on page 73
assignments.
Pressing the MData
displays the metadata of the selected Dolby E or Dolby Digital channels
being monitored. Each press of the
properties of the selected Dolby channels in (approximately) the
following order:
• Audio encoding format and bit depth (e.g., Dolby AC-3, Dolby E 20
bit)
• Data rate (e.g., 32, 384, 640)
• Program configuration (e.g., 5.1 + 2, 4x2, 3x2)
• Video frame rate (e.g., 29.97, 30)
• Audio coding (e.g., 3/2, 2/0)
• Dialog normalization (0 to –31 dB)
• Bitstream mode (e.g., complete/main, music/effects)
• Surround mode (e.g., srnd not indicated, not Dolby srnd)
• Surround and center mix level (e.g., -3.0 dB, -6.0 dB)
Note:
The data rate is only available for Dolby D. The video frame
rate is only available for Dolby E.
Some examples of how Dolby metadata information is displayed in the
LCD screen are shown in
53.
for a table of Dolby main output channel
button when Dolby Decode
MData
Figure 5–3 on page 53
mode is enabled
button cycles through the
and Figure 5–4 on page