Sdi Delay - Wohler AMP1-E8DA User Manual

Figure 6–10
The
Once you press the
warn you that the preset will be erased.
Figure 6–11
Pressing the
button will not erase that preset. In either case, control returns to the
menu to choose another preset to erase.
Figure 6–12
Press the
Monitoring Mode

SDI Delay

Important:
This menu item is not available if this unit has no de-embedder card.
This feature allows you to change the amount of delay added to the de-
embedded audio signals from the SDI inputs. This allows you to
compensate for video processing delays in external video signal chains
and monitors. This selection delays the monitored SDI audio and the
Erasing a Preset - Choose the Preset
Number
Left and Right buttons select from among the available presets.
Enter
Erasing a Preset - Confirmation
Enter button will erase that preset. Pressing the
Erasing a Preset - Select the Preset to
Erase
Esc button to exit Setup Mode and return to
.
Choose PresetNum
Preset1: Off Air
button to select a preset, the system will
Erase Preset?
Preset1: Off Air
Choose PresetNum
Preset2: VTR #2
Esc
Normal