Not-Disclosed-To-Users Functions (Function Code 45) - Brother HL-4140CN Service Manual

1.4.11 Not-disclosed-to-users functions (Function code 45)

Regarding the not-disclosed-to-users functions, the function setting can be executed by a
simple panel operation.
■ Changing return value of USB No.
<Function>
When the OS of the computer is Windows Vista
through USB 2.0 full speed, the OS might fail to get the serial No. of the USB device
depending on the computer and USB device. When the OS fails to get the serial No., the
return value may continue to increase every time the device is connected to the computer. To
avoid this problem, the return value of the serial No. can be fixed to "0".
LCD
USBNo. =ON
USBNo. =OFF
"*" is displayed at the end of the currently specified function in the LCD display.
<Operating procedure>
(1) Press the
the maintenance mode. Then, press the OK button. The "USBNo." will appear on the
LCD.
(2) Press the OK or Go button to select "USB No. = ON" or "USB No. = OFF," and then press
the OK or Go button.
(3) "Accepted" is displayed on the LCD, and the printer goes back to the initial state of the
maintenance mode.
(4) Turn the power switch of the printer OFF.
Note:
This mode is enabled when the power of the printer is turned OFF/ON after the setting
is done.
Returns the serial No. of the device. (default)
Returns "0".
or button to display "MAINTENANCE 45" on the LCD in the initial state of
5-17
®
, and the computer is connected to a device
Description
Confidential