Removal Of Electrical Box, Pcb And Swing Motor - Daikin FTXS09HVJU Service Manual

SiUS04-904
1.4

Removal of Electrical Box, PCB and Swing Motor

Procedure
Step
 Remove the front grille.
1. Removal of the electrical
box.
1 Disconnect the
connection wires.
2 Disconnect connectors
(S1 and S7) of fan motor.
Disconnect one connector
3
(S6) of swing motor.
Remove heat exchanger
thermistor.
4
162
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembly work.
Procedure
FTXS09/12HVJU
Points
 Pay attention to the direction
of the retainer of the
thermistor so that the retainer
does not touch the harness
(The same as the existing
models.)
Removal Procedure