SiUS04-904
Step
2. Removal of the front grille
assembly.
1
Remove the 2 screws, in
the right and the left,
which fix the main body
with the front grille.
2
Release the 2 hooks on
the upper part.
In case that the hooks are
not pressed from above,
remove the front panel
and then remove the grille
while pushing the hook
through a clearance
between the front grille
and the heat exchanger.
158
Procedure
FTXS09/12HVJU
Points
Screw stoppers inside the flap
which were equipped in the
existing models are not
provided.
At the upper part there are 2
hooks in the left and the right.
Release the hooks by
pressing knobs with a flat
screwdriver.
Removal Procedure