Crestron TPS-6X Series Operation Manual page 8

Isys 5.7" Wireless Touch Screens
4 • Isys 5.7" Wireless Touch Screens: TPS-6X Series
TableTop Tilt Docking Station
Placing the touch screen onto the TPS-6X-DS Docking Station
stylish tilt touch screen, providing wired communications and video capability while
charging the touch screen's internal battery. Both wired Ethernet and Cresnet
connectivity are available, so when the touch screen is placed on the docking station,
it can switch automatically from RF wireless to fully wired operation if either
Ethernet or Cresnet is connected. Without a wired connection present, the touch
screen continues to operate wirelessly while it charges.
The TableTop Tilt Docking Station features a tiltable docking port, allowing the
touch screen to be tilted at any angle up to 45 degrees for optimal viewing and
operation when docked. The angle can be freely adjusted or locked down at a fixed
angle. Strong magnets help guide the touch screen onto the docking port and hold it
in place and a finger operated latch can be engaged at any time to secure the touch
screen to the docking station. The touch screen can even be attached to the docking
station semi-permanently using the provided locking pin for a sleek, full time
tabletop touch screen solution.
For applications that do not require the latch or locking pin features, a "no lock"
docking station (TPS-6XNL-DS
Low Profile Docking Station
As an alternative to the TableTop Tilt Docking Stations, a low profile docking
1
station (TPS-6X-DS-LP , sold separately) is also offered. The low profile dock
affords all the connectivity and charging capabilities of the tilt dock but with a
smaller footprint and lower stance that is perfect for certain countertops, side tables
and pull out drawers.
Interface Module
For easy, versatile placement, each docking station features a single flexible cable
exiting the rear of the docking station base. On the tilt models, this cable can be
repositioned to exit from the bottom for a very clean, cordless appearance. The 9 foot
(2.75 meter) cable extends to a compact Interface Module (TPS-6X-IMCW
may be mounted conveniently in a wall box or attached to any flat surface or rack
rail. The interface module provides all the wired connections for power,
communications and video.
Full Motion Video
When docked, the TPS-6X can display full motion video
monitor a security camera or preview a DVD or television channel, right on the
touch screen display. The video image is fully scalable for viewing in any size
window or full screen. The choice of balanced or unbalanced composite inputs
allows compatibility with both conventional coaxial and Crestron Home
2
AV distribution systems .
On-Screen Keyboard/Mouse
On-screen keyboard and mouse capabilities enable the TPS-6X to provide full
control of computers running TouchPoint
(VMK-WIN)).
1. TPS-6X-DS Tilt docking Station included with TPS-6X models. TPS-6X-DS-LP included with
TPS-6X-LP models. TPS-6XNL-DS No Lock Tilt Docking Station included with TPS-6XNL models.
TPS-6X-IMCW Interface Module included with all models. Refer to individual product specifications
for additional information.
2. Touch screen must be docked to enable video or wired communication.
Crestron TPS-6X Series
1
, sold separately) is also offered.
2
, providing the ability to
®
Virtual Mouse & Keyboard Software
Operations Guide – DOC. 6875C
1
converts it to a
®
1
), which
®
Balanced