Crestron TPS-6X Series Operation Manual page 30

Isys 5.7" Wireless Touch Screens
26 • Isys 5.7" Wireless Touch Screens: TPS-6X Series
When all settings have been entered, touch RETURN to go back to the main
"ETHERNET SETUP" menu and touch Reboot required for setting to take effect.
Reboot Now.
WIRELESS
Touch WIRELESS to enter the "WIRELESS SETUP" menu.
"WIRELESS SETUP" Menu
The "WIRELESS SETUP" menu displays RF connection status, signal strength,
gateway name and UID, RF channel and RF power settings. – and + controls are
provided to set the RF ID and IR ID.
The ACQUIRE START button is used in conjunction with the ACQUIRE button
on the CEN(I)-ERFGW-POE gateway (sold separately) to place the TPS-6X in
Acquire mode. Refer to the "Operation" section of the CEN-ERFGW-POE Extended
Range RF Wireless Gateway Operations & Installation Guide (Doc. 7158) for
details.
When the acquire process is complete, the menu displays an Acquire Complete
message, as shown in the following illustration.
"WIRELESS SETUP" Menu (Acquire Complete)
Crestron TPS-6X Series
Operations Guide – DOC. 6875C