Crestron TPS-6X Series Operation Manual page 34

Isys 5.7" Wireless Touch Screens
30 • Isys 5.7" Wireless Touch Screens: TPS-6X Series
"WIRELESS SETUP" Menu (Showing All Gateway UIDs)
Touch See All GW UIDs again to turn off the UID display and return to the screen
shown on page 29.
To remove an acquired gateway from the list, select the appropriate index for that
gateway (GW 1 through GW 8) and touch Remove Selected GW. A CONFIRM
GATEWAY REMOVE message appears, as shown in the illustration that follows.
"WIRELESS SETUP" Menu (Showing CONFIRM GATEWAY REMOVE Message)
Touch Yes, Remove to remove the gateway or No to cancel.
The Current Link Information section of the screen (refer to illustration at the top of
this page) shows the following:
1. The Link status indicator light shows if the TPS-6X is currently connected
to a gateway.
2. The GW No indicator shows the index of the gateway in the list, to which
the TPS-6X is currently connected.
3. The Signal Strength meter shows the quality of the signal from the currently
connected gateway.
Touch RETURN to go back to the main "WIRELESS SETUP" menu.
Crestron TPS-6X Series
Operations Guide – DOC. 6875C