Crestron TPS-6X Series Operation Manual page 18

Isys 5.7" Wireless Touch Screens
14 • Isys 5.7" Wireless Touch Screens: TPS-6X Series
CALIBRATION MENU
Touch the Touch Screen Calibration button to enter the CALIBRATION MENU.
CALIBRATION MENU
Touch Perform Calibration. The message "Touch Upper Left +" appears centered
on the panel with a crosshair in the upper left corner. Touch the center of the
crosshair in the corner of the screen to initiate calibration. Another message, "Touch
Upper Right +", appears with a crosshair in the correct corner. Touch the center of
the crosshair in the corner of the screen. A final message, "Touch Lower Right +",
appears with the crosshair in the correct corner. Touch the center of the crosshair in
the corner of the screen to conclude calibration and return to the MAIN MENU.
NOTE: When touching the screen during calibration, be as accurate as possible.
Use the tip of a capped pen or the eraser end of a pencil. To cancel calibration and
return to the MAIN MENU without saving calibration data, create a calibration error
by touching the screen in the same spot two times. If calibration has not been started,
it is possible to return to the MAIN MENU by touching RETURN.
Crestron TPS-6X Series
Operations Guide – DOC. 6875C